Thai Silk

Thai Silk fashion outfits and interior decoration.

Thai silk is a supple and strong fabric and it is produced in two versions in the north of Thailand one version is a bit of a stiffer material as well as the same product from Myanmar and the other version is a soft cuddly one similar to Chinese silk.

Production is originated in northeastern Thailand where the weaving of Thai silk has a long tradition as a traditional craft in many townships in northern Thailand. 

More silk products including clothing and flowers production is originated in northeastern Thailand where the weaving of Thai silk has a long tradition as a traditional craft in many townships in northern Thailand.

Communities in northeast Thailand raise their silkworms by feeding them Mulberry leaves, extract the silk thread from the cocoon spin and dye the yarn. After they are weaving the silk to beautiful fabrics a good example are high end silk scarfs.

In the outgoing 19th century when cheap fabrics from China and Japan came to market, the Thai lost a huge piece of market share to them. Several attempts were made to prop up the market for Thai silk again, however all attempts failed  to uplift the Thai silk production. A few years after World War II, an American named In the 1950 ties Jim Thompson an American was able to reviving the silk production in Thailand again by focusing on the expensive up market fro Silk material.

Today, several silk companies are still in business, some in the vicinity of Bangkok and others in the Thai northeast. In particular also in Chiang Mai. Actually at Chiang Mai along the Sankampaeng Road are several Thai silk production companies where you can go and have a look how silk is made. From the cocoon extraction, spinning, weaving all the way to the the great silk cloth.

However, northeast Thailand is the major region of Thai silk production. The company founded by Jim Thompson near the town of Pak Thong Chai is the largest hand weaving factory in the world.

Plain and printed silks is produced in Thailand in different weights. A special type of Thai silk is called Mudmee. It is brocaded with silver threads in traditional Thai patterns and designs. Producing Mudmee is a long and difficult procedure which makes it the most expensive silk. Actually Thailand is still focusing mainly on the upper market silk supply.
Silk from Thailand can be bought  not only in local shops in but also via the internet on a international level. Very beautiful are Thai silk bedding and curtains, but very expensive.

  • Thai Silk means luxury.

Thai silk has set the standard in luxury fabrics for a long time, but Thai silk surely took over at the high end. The origins of silk date back to Ancient China. Legend has it that a Chinese princess was sipping tea in her garden when a cocoon fell into her cup, and the hot tea loosened the long strand of silk. Ancient literature, however, attributes the popularization of silk to the Chinese Empress Si-Ling, to around 2600 B.C. Called the Goddess of the Silkworm, Si-Ling apparently raised silkworms and designed a loom for making silk fabrics.

The Chinese used silk fabrics for arts and decorations as well as for clothing. Silk became an integral part of the Chinese economy and an important means of exchange for trading with neighboring countries. Caravans traded the prized silk fabrics along the famed Silk Road into the Near East. By the fourth century B.C. , Alexander the Great is said to have introduced silk to Europe. The popularity of silk was influenced by Christian prelates who donned the rich fabrics and adorned their altars with them. Gradually the nobility began to have their own clothing fashioned from silk fabrics as well.

Initially the Chinese were highly protective of their secret to making silk. Indeed the reigning powers decreed death by torture to anyone who divulged the secret of the silk-worm. Eventually, the mystery of the silk-making process was smuggled into neighboringregions, reaching Japan about A.D. 300 and India around A.D. 400. By the eighth century, Spain began producing silk, and 400 years later Italy became quite successful at making silk, with several towns giving their names to particular types of silk.

  • Silk Fabrics.


The first country to apply scientific techniques to raising silkworms was Japan,which produces some of the world finest silk fabrics. Other countries that also produce quality silks are China, Italy, India, Spain, and France. China was the largest exporter of raw silk in the early 1990s, accounting for about 85% of the worlds raw silk, worth about $800 million. Exports of China's finished silk products were about half of the worlds total at about $3 billion.

Silk and especially Thai silk is highly valued because it possesses many excellent properties. Not only does it look lustrous and feel luxurious, but it is also lightweight, resilient, and extremely strong, one filament of silk is stronger then a comparable filament of steel! Although fabric manufacturers have created less costly alternatives to silk, such as nylon and polyester, silk is still in a class by itself.

  • Silk Raw Materials.

The secret to silk production is the tiny creature known as the silkworm, which is the caterpillar of the silk moth Bombyx mori. It feeds solely on the leaves of mulberry trees. Only one other species of moth, the Antheraea mylitta, also produces silk fiber. This is a wild creature, and its silk filament is about three times heavier than that of the cultivated silkworm. Its coarser fiber is called tussah.



The life cycle of the Bombyx mori begins with eggs laid by the adult moth. The larvae emerge from the eggs and feed on mulberry leaves. In the larval stage, the Bombyx is the caterpillar known as the silkworm. The silkworm spins a protective cocoon around itself so it can safely transform into a The secret to silk production is the tiny creature known as the silk-worm, which is the caterpillar of the silk moth Bombyx mori. chrysalis. In nature, the chrysalis breaks through the cocoon and emerges as a moth. The moths mate and the female lays 300 to 400 eggs. A few days after emerging from the cocoon, the moths die and the life cycle continues.



The cultivation of silkworms for the purpose of producing silk is called sericulture. Over the centuries, sericulture has been developed and refined to a precise science. Sericulture involves raising healthy eggs through the chrysalis stage when the worm is encased in its silky cocoon. The chrysalis inside is destroyed before it can break out of the cocoon so that the precious silk filament remains intact. The healthiest moths are selected for breeding, and they are allowed to reach maturity, mate, and produce more eggs.

Generally, one cocoon produces between 1,000 and 2,000 feet of silk filament, made essentially of two elements. The fiber, called fibroin, makes up between 75 and 90%, and sericin, the gum secreted by the caterpillar to glue the fiber into a cocoon, comprises about 10-25% of silk. Other elements include fats, salts, and wax. To make one yard of silk material, about 3,000 cocoons are used.

  • Sericulture breeding silkworms.

Only the healthiest moths are used for breeding. Their eggs are categorized, graded, and meticulously tested for infection. Unhealthy eggs are burned. The healthiest eggs may be placed in cold storage until they are ready to be hatched. Once the eggs are incubated, they usually hatch within seven days. They emerge at a mere one-eighth of an inch (3.2 mm) long and must be maintained in a carefully controlled environment. Under normal conditions, the eggs would hatch once a year in the spring when mulberry trees begin to leaf. But with the intervention of seri culturists, breeding can occur as many as three times per year.

  • Feeding the larva.

The silkworms feed only on the leaves of the mulberry tree, there are plent in Thailand. The mulberry leaves are finely chopped and fed to the voracious silkworms every few hours for 20 to 35 days. During this period the worms increase in size to about 3.5 inches (8.9 cm). They also shed their skin, or molt, four times and change color from gray to a translucent pinkish color.

  • Spinning the cocoon.

When the silkworm starts to fidget and toss its head back and forth, it is preparing to spin its cocoon. The caterpillar attaches itself to either a twig or rack for support. As the worm twists its head, it spins a double strand of fiber in a figure-eight pattern and constructs a symmetrical wall around itself. The filament is secreted from each of two glands called the spinneret located under the jaws of the silkworm. The insoluble protein-like fiber is called fibroin. 4 The fibroin is held together by sericin, a soluble gum secreted by the worm, which hardens as soon as it is exposed to air. The result is the raw silk fiber, called the bave. The caterpillar spins a cocoon encasing itself completely. It can then safely transform into the chrysalis, which is the pupa stage.

  • Stoving the chrysalis.

The natural course would be for the chrysalis to break through the protective cocoon and emerge as a moth. However, seri culturists must destroy the chrysalis so that it does not break the silk filament. This is done by stoving, or stifling, the chrysalis with heat.

  • The Filature.

Sorting and softening the cocoons have a look in this pictures from Chiang Mai Thailand.
The filature is the factory in which the cocoons are processed into silk thread. In the filature the cocoons are sorted by various characteristics, including color and size, so that the finished product can be of uniform quality. The cocoons must then be soaked in hot water to loosen the sericin. Although the silk is about 20% sericin, only 1% is removed at this stage. This way the gum facilitates the following stage in which the filaments are combined to form silk thread, or yarn.

  • Reeling the filament.

Reeling may be achieved manually or automatically. The cocoon is brushed to locate the end of the fiber. It is threaded through a porcelain eyelet, and the fiber is reeled onto a wheel. Meanwhile, diligent operators check for flaws in the filaments as they are being reeled. 8 As each filament is nearly finished being reeled, a new fiber is twisted onto it, thereby forming one long, continuous thread. Sericin contributes to the adhesion of the fibers to each other.

  • Packaging the skeins.

The end product, the raw Thai silk filaments, are reeled into skeins. These skeins are packaged into bundles weighing 5-10 pounds (2-4 kg), called books. The books are further packaged into bales of 133 pounds (60 kg) and transported to manufacturing centers.

  • Forming silk yarn.
Thai Silk thread, also called yarn, is formed by throwing, or twisting, the reeled silk. First the skeins of raw silk are categorized by color, size, and quantity. Next they are soaked in warm water mixed with oil or soap to soften the sericin. The silk is then dried. 11 As the silk filaments are reeled onto bobbins, they are twisted in a particular manner to achieve a certain texture of yarn. For instance singles consist of several filaments which are twisted together in one direction. They are turned tightly for sheer fabrics and loosely for thicker fabrics. Combinations of singles and untwisted fibers may be twisted together in certain patterns to achieve desired textures of fabrics such as crepe de chine, voile, or tram. Fibers may also be manufactured in different patterns for use in the nap of fabrics, for the outside, or for the inside of the fabric. 12 The silk yarn is put through rollers to make the width more uniform. The yarn is inspected, weighed, and packaged. Finally, the yarn is shipped to fabric manufacturers.

  • Degumming thrown yarn.

To achieve the distinctive softness and shine of Thai silk, the remaining sericin must be removed from the yarn by soaking it in warm soapy water. Degumming decreases the weight of the yarn by as much as 25%.

  • Finishing Thai silk fabrics.

After degumming, the silk yarn is a creamy white color. It may next be dyed as yarn, or after the yarn has been woven into fabric. The silk industry makes a distinction between pure-dye silk and what is called weighted silk. In the pure-dye process, the silk is colored with dye, and may be finished with water-soluble substances such as starch, glue, sugar, or gelatin. To produce weighted silk, metallic substances are added to the fabric during the dying process. This is done to increase the weight lost during degumming and to add body to the fabric. If weighting is not executed properly, it can decrease the longevity of the fabric, so pure-dye silk is considered the superior product. After dyeing, silk fabric may be finished by additional processes, such as bleaching, embossing, steaming, or stiffening.

  • Spun Silk.

Not all of the Thai silk filament is usable for reeled silk. The leftover silk may include the brushed ends or broken cocoons. This shorter staple silk may be used for spinning silk in a manner of fabrics like cotton and linen. The quality of spun silk is slightly inferior to reeled silk in that it is a bit weaker and it tends to become fuzzy. The waste material from the spun silk can also be used for making ;waste silk; or silk oil. This coarse material is commonly used for draperies and upholstery.

  • The Future.

Thai silk - sericulture is an ancient science, and the modern age has not brought great changes to silk manufacture. Rather, man-made fibers such as polyester, nylon, and acetate have replaced silk in many instances. But many of the qualities of silk cannot be reproduced. For example, silk is stronger than an equivalent strand of steel. Some recent research has focused on the molecular structure of silk as it emerges from the silkworm, in order to better understand how new, stronger artificial fibers might be constructed. Silk spun by the silkworm starts out as a liquid secretion.

The liquid passes through a brief interim state with a semi-ordered molecular structure known as nematic liquid crystal, before it solidifies into a fiber. Materials scientists have been able to manufacture durable fibers using liquid crystal source material, but only at high temperatures or under extreme pressure. Researcher are continuing to study the silkworm to determine how liquid crystal is transformed into fiber at ordinary temperatures and pressures.

Comments